User can select either “Moisture Control” or “Timer Control” mode
Solar Powered product, low carbon emission, great for outdoor applications
Appropriate for open as well as protected cultivation (greenhouses), which don’t have enough water pressure for irrigating all the zones at once.
Controller can control opening/closing of upto 4 valves. User can choose following valve types: Latching valve, 12 V DC valve, relay controlled upto 24V DC with external power supply
Controller can manually open/close valves in case of emergency
It can also be connected with 12V DC relay to control one water pump
The system is very easy to install and easy to use
Anti-thief rugged steel box
Features under “Moisture Control” mode:-
According to the soil moisture sample collected it control first zone irrigation, then irrigate other 3 zones according to the same length.
Applies to any soil type, accurate repeatability, low cost auto irrigation.
User can learn and setup moisture control levels according to current moisture level, or can adjust the levels on the LCD screen.
With build in clock, user can setup periods to forbid irrigation.
LCD will show in sequence: Current mode and system time, 4 valves status, system operating status and current moisture, and set wet/dry control levels.
Can program to setup maximum irrigation length.
Features under “Timer Control” mode:-
Can program to set up different timer schedules for different valves.
Can setup three irrigation schedules for each valve.
Uses the moisture sensor as rain sensor. User can set up maximum wet control level, so when it is reached due to rain, irrigation will turn OFF.
The LCD will show in sequence: Current mode and system time, 4 valves status moisture level collected by the rain sensor.
Auto Irrigation Controller 
